✨ tests: add local Docker end-to-end suite (Traefik + Crowdsec)

A per-scenario end-to-end suite that boots real Traefik + Crowdsec containers and exercises the plugin loaded from a local path. Scenarios: stream / live / none modes, trusted IPs, custom ban page, captcha, and appsec. This suite is local-only (run with `make e2e`): it boots a real Crowdsec and, for appsec, downloads the OWASP CRS collections — heavier and less deterministic than CI needs. CI runs a separate, lighter binary + mock-LAPI suite instead (see the companion PR). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-09-02 20:28:50 +02:00 · 2026-06-06 12:04:08 +02:00
41 changed files with 860 additions and 932 deletions
@@ -1,42 +0,0 @@
-name: E2E
-
-on:
-  push:
-    branches: [main]
-  pull_request:
-
-concurrency:
-  group: e2e-${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: true
-
-permissions:
-  contents: read
-
-jobs:
-  e2e:
-    name: e2e (binary + mock LAPI)
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-      - name: Set up Go
-        uses: actions/setup-go@v6
-        with:
-          # Track go.mod (Go 1.22) — the plugin's yaegi-bound floor. Keeps the
-          # single source of truth and builds the mock on the supported version.
-          go-version-file: go.mod
-      # CI runs the binary/mock suite only: Traefik as a downloaded binary +
-      # a small LAPI mock (no Docker, no real Crowdsec). It validates the
-      # plugin's own behaviour. Crowdsec / AppSec correctness is upstream's
-      # responsibility, so those are intentionally out of scope here. The
-      # Docker suite (tests/e2e/scenarios) stays available for local debugging.
-      # `-k` keeps going after a failing scenario so the logs cover all of
-      # them, while make still exits non-zero if any scenario failed.
-      - name: Run mock scenarios
-        run: make -k e2e_mock
-      - name: Upload logs on failure
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: e2e-logs
-          path: /tmp/e2e-mock-*.log
-          if-no-files-found: ignore
@@ -5,7 +5,3 @@ conf
 db
 logs
 docker-compose.dev.yml
-
-# Binary e2e suite working cache: Traefik binary + compiled mock. Persisted
-# across local runs; CI runs on fresh runners so it is recreated every time.
-tests/e2e/mock/.cache/
@@ -1,10 +1,8 @@
-.PHONY: lint test vendor clean e2e_mock
+.PHONY: lint test vendor clean e2e

 export GO111MODULE=on

-# Binary/mock suite (Traefik binary + mock LAPI). This is what CI runs.
-# The local Docker suite (make e2e) lives in a separate PR/branch.
-E2E_MOCK_SCENARIOS := stream-mode live-mode none-mode trusted-ips custom-ban-page captcha appsec
+E2E_SCENARIOS := stream-mode live-mode none-mode trusted-ips custom-ban-page captcha appsec

 default: lint test

@@ -17,10 +15,10 @@ test:
 yaegi_test:
 	yaegi test -v .

-e2e_mock: $(addprefix e2e_mock_,$(E2E_MOCK_SCENARIOS))
+e2e: $(addprefix e2e_,$(E2E_SCENARIOS))

-e2e_mock_%:
-	./tests/e2e/mock/scenarios/$*/run.sh
+e2e_%:
+	./tests/e2e/scenarios/$*/run.sh

 vendor:
 	go mod vendor
@@ -0,0 +1,55 @@
+# End-to-end test suite
+
+These tests spin up real Traefik + Crowdsec containers and exercise the
+plugin in the same conditions Traefik uses in production: loaded from a
+local path, no module download, no mocking.
+
+Each scenario lives in its own directory under `scenarios/` and owns:
+
+- `docker-compose.yml` — the stack to spin up
+- `run.sh` — orchestration + assertions
+- optional fixtures (`acquis.yaml`, `ban.html`, ...)
+
+## Running locally
+
+Prerequisites: `docker`, `docker compose`, `curl`, `bash`.
+
+Run a single scenario:
+
+```bash
+./tests/e2e/scenarios/stream-mode/run.sh
+# or
+make e2e_stream-mode
+```
+
+Run everything:
+
+```bash
+make e2e
+```
+
+Scenarios run **sequentially** on a single host: they share the canonical
+`crowdsec` container name (so `cscli` commands work uniformly) and the same
+`8000:80` port. Each scenario uses its own Docker Compose project
+(`-p e2e-<scenario>`) and tears its stack down on exit, so the next one
+starts clean. `make e2e` runs them one after another; Docker reuses the
+images pulled by the first scenario, so the Traefik / Crowdsec / whoami
+images are downloaded only once for the whole suite.
+
+## Writing a new scenario
+
+1. Copy `scenarios/stream-mode/` as a template.
+2. Rename `container_name`s (keep `crowdsec` for the LAPI container).
+3. Edit `run.sh` to express the behavior under test.
+4. Add the scenario name to `E2E_SCENARIOS` in the `Makefile`.
+
+## CI
+
+This Docker suite is **local-only** and intentionally not run in CI: it boots a
+real Crowdsec (and downloads the AppSec collections for that scenario), which is
+heavier and less deterministic than CI needs. CI instead runs a lighter
+binary + mock-LAPI suite that exercises the plugin without Docker or a real
+Crowdsec.
+
+Run this suite locally with `make e2e` (all scenarios) or
+`make e2e_<scenario>` (one scenario).
@@ -0,0 +1,78 @@
+#!/usr/bin/env bash
+# Shared helpers for end-to-end scenarios.
+# Dependencies: bash, curl, docker.
+
+# Wait until the Crowdsec LAPI reports ready, or fail after timeout.
+# Usage: wait_crowdsec_ready [container_name] [timeout_seconds]
+wait_crowdsec_ready() {
+  local container="${1:-crowdsec}"
+  local timeout="${2:-90}"
+  local elapsed=0
+  while (( elapsed < timeout )); do
+    if docker exec "$container" cscli lapi status >/dev/null 2>&1; then
+      return 0
+    fi
+    sleep 1
+    ((elapsed++))
+  done
+  echo "wait_crowdsec_ready: timed out after ${timeout}s waiting for $container" >&2
+  return 1
+}
+
+# Poll URL until it returns the expected status code, or fail.
+# Usage: wait_for_status URL CODE [TIMEOUT_SECONDS] [curl args...]
+wait_for_status() {
+  local url="$1" expected="$2" timeout="${3:-30}"
+  shift 3 || true
+  local elapsed=0
+  local got=""
+  while (( elapsed < timeout )); do
+    got=$(curl -s -o /dev/null -w '%{http_code}' "$@" "$url" || true)
+    if [[ "$got" == "$expected" ]]; then
+      return 0
+    fi
+    sleep 1
+    ((elapsed++))
+  done
+  echo "wait_for_status: $url expected $expected, last seen ${got:-<none>}" >&2
+  return 1
+}
+
+# Assert a single curl returns the expected status code.
+# Usage: assert_status URL CODE [curl args...]
+assert_status() {
+  local url="$1" expected="$2"
+  shift 2 || true
+  local got
+  got=$(curl -s -o /dev/null -w '%{http_code}' "$@" "$url")
+  if [[ "$got" != "$expected" ]]; then
+    echo "assert_status: $url expected $expected, got $got" >&2
+    return 1
+  fi
+}
+
+# Assert a response header matches a value (case-insensitive name).
+# Usage: assert_header URL HEADER VALUE [curl args...]
+assert_header() {
+  local url="$1" header="$2" expected="$3"
+  shift 3 || true
+  local got
+  got=$(curl -s -D - -o /dev/null "$@" "$url" | tr -d '\r' \
+    | awk -v h="${header,,}" -F': ' 'tolower($1) == h { print $2; exit }')
+  if [[ "$got" != "$expected" ]]; then
+    echo "assert_header: $url header $header expected \"$expected\", got \"$got\"" >&2
+    return 1
+  fi
+}
+
+# Dump diagnostic info for a compose project; called on failure.
+# Usage: dump_diagnostics PROJECT COMPOSE_FILE
+dump_diagnostics() {
+  local project="$1" compose_file="$2"
+  echo "=== docker compose ps ==="
+  docker compose -p "$project" -f "$compose_file" ps || true
+  echo "=== docker compose logs ==="
+  docker compose -p "$project" -f "$compose_file" logs --no-color || true
+  echo "=== cscli decisions list ==="
+  docker exec crowdsec cscli decisions list 2>/dev/null || true
+}
@@ -1,84 +0,0 @@
-# Binary e2e suite (Traefik binary + mock LAPI)
-
-This suite runs **Traefik as a downloaded binary** with the plugin loaded from
-the local source tree, and replaces Crowdsec with a small **HTTP mock**
-([`mocklapi/`](mocklapi/main.go), a stdlib-only Go command). No Docker, no real
-Crowdsec.
-
-It is what **CI runs** (`make e2e_mock`). A separate, local-only **Docker
-suite** (real Traefik + Crowdsec, under `tests/e2e/scenarios`) is kept for
-high-fidelity debugging against a real Crowdsec but is not exercised in CI; it
-ships in its own PR (#333).
-
-## Scope — what this suite tests
-
-These tests validate the **plugin's own behaviour**: the request flow through
-the Traefik middleware, the live / none / stream modes, caching, trusted-IP
-bypass, ban / captcha page rendering, and the AppSec request path (header
-forwarding + enforcing the engine's allow/block verdict).
-
-The mock stands in for Crowdsec, emulating the slice of the LAPI HTTP contract
-the plugin consumes — including a single, deterministic AppSec rule (block any
-URI containing `rpc2`, the probe from [`examples/appsec-enabled`](../../../examples/appsec-enabled)).
-It is not the real WAF engine, so this suite exercises the plugin's AppSec
-*wiring* rather than the detection accuracy of OWASP CRS / virtual patching —
-that lives upstream in Crowdsec.
-
-## What runs
-
-| Component | How |
-|-----------|-----|
-| Traefik   | Binary `v3.7.1`, downloaded into `.cache/` (reused across local runs; re-downloaded on fresh CI runners) |
-| Plugin    | Loaded via `experimental.localPlugins` from the repo root (symlinked into `plugins-local/`) |
-| LAPI      | `mocklapi` — a stdlib-only Go command (its own nested module), compiled and cached under `.cache/`, driven through `/admin` endpoints instead of `cscli` |
-| AppSec    | WAF stand-in built into the mock — blocks URIs containing `rpc2`, allows the rest |
-| Backend   | A plain HTTP responder built into the mock |
-
-Fixed ports (override with env vars if needed): Traefik `8000`, LAPI `8090`,
-backend `8091`, AppSec `8092`.
-
-## Running locally
-
-Prerequisites: `bash`, `curl`, `go`, `tar`. On first use the Traefik binary is
-fetched and the mock is compiled into `.cache/`. That cache is reused across
-local runs; CI runs on fresh runners, so both are recreated on every CI run.
-
-```bash
-# one scenario
-make e2e_mock_stream-mode
-# or directly
-./tests/e2e/mock/scenarios/stream-mode/run.sh
-
-# the whole suite
-make e2e_mock
-```
-
-## Layout
-
-```
-mock/
-  lib/
-    common.sh     # stack lifecycle, Traefik download, mock build, assertions, admin client
-    traefik.yml   # static Traefik config (shared by all scenarios)
-  mocklapi/
-    go.mod        # nested module — kept out of the plugin's build/lint/vendor
-    main.go       # mock LAPI + AppSec stand-in + backend
-  scenarios/
-    <name>/
-      dynamic.yml # Traefik dynamic config (router + bouncer middleware + backend)
-      run.sh      # assertions for the scenario
-      *.html      # optional fixtures (ban / captcha templates)
-```
-
-`dynamic.yml` uses placeholders (`@@APIKEY@@`, `@@LAPI_HOST@@`,
-`@@BACKEND_URL@@`, `@@SCENARIO_DIR@@`) that `common.sh` substitutes at runtime.
-
-## Adding a scenario
-
-1. Create `scenarios/<name>/dynamic.yml` and `run.sh` (copy `stream-mode/` as a
-   template).
-2. In `run.sh`, define a `body` function with the assertions and call
-   `run_scenario "<name>" "$HERE" body`.
-3. Drive decisions with `lapi_add_decision <ip> [type] [duration]` and
-   `lapi_delete_decision <ip>`.
-4. Add `<name>` to `E2E_MOCK_SCENARIOS` in the `Makefile`.
@@ -1,248 +0,0 @@
-#!/usr/bin/env bash
-# Shared helpers for the binary (mock) e2e suite.
-#
-# Unlike the Docker suite under tests/e2e/scenarios, this one runs Traefik as a
-# downloaded binary and replaces Crowdsec with a small HTTP mock (the mocklapi
-# Go command). It validates the plugin's own behaviour (modes, cache, trusted
-# IPs, ban / captcha rendering, AppSec wiring) — not the accuracy of Crowdsec's
-# detection or its WAF engine, which the mock only stands in for.
-#
-# Dependencies: bash, curl, go, tar. The Traefik binary is downloaded and the
-# mock is compiled into .cache/ on first use. That cache persists across local
-# runs; CI runs on fresh runners, so both are recreated on every CI run.
-
-set -euo pipefail
-
-# Pinned to match the Docker suite (tests/e2e/scenarios/*/docker-compose.yml).
-TRAEFIK_VERSION="${TRAEFIK_VERSION:-v3.7.1}"
-
-WEB_PORT="${WEB_PORT:-8000}"
-LAPI_PORT="${LAPI_PORT:-8090}"
-BACKEND_PORT="${BACKEND_PORT:-8091}"
-APPSEC_PORT="${APPSEC_PORT:-8092}"
-LAPI_KEY="${LAPI_KEY:-e2e-mock-key}"
-
-MOCK_LIB_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-REPO_ROOT="$(cd "$MOCK_LIB_DIR/../../../.." && pwd)"
-CACHE_DIR="$MOCK_LIB_DIR/../.cache"
-
-# Populated by start_stack / run_scenario, consumed by the EXIT trap.
-WORKDIR=""
-TRAEFIK_PID=""
-MOCK_PID=""
-SCENARIO_NAME=""
-SCENARIO_LOG=""
-
-# Resolve (and cache) the Traefik binary for this host, echoing its path.
-ensure_traefik() {
-  local bin="$CACHE_DIR/traefik-$TRAEFIK_VERSION"
-  if [[ -x "$bin" ]]; then
-    echo "$bin"
-    return 0
-  fi
-  mkdir -p "$CACHE_DIR"
-  local os arch
-  case "$(uname -s)" in
-    Linux) os=linux ;;
-    Darwin) os=darwin ;;
-    *) echo "ensure_traefik: unsupported OS $(uname -s)" >&2; return 1 ;;
-  esac
-  case "$(uname -m)" in
-    x86_64 | amd64) arch=amd64 ;;
-    aarch64 | arm64) arch=arm64 ;;
-    *) echo "ensure_traefik: unsupported arch $(uname -m)" >&2; return 1 ;;
-  esac
-  local url="https://github.com/traefik/traefik/releases/download/${TRAEFIK_VERSION}/traefik_${TRAEFIK_VERSION}_${os}_${arch}.tar.gz"
-  echo "ensure_traefik: downloading $url" >&2
-  local tmp
-  tmp="$(mktemp -d)"
-  curl -sSfL "$url" -o "$tmp/traefik.tar.gz"
-  tar -xzf "$tmp/traefik.tar.gz" -C "$tmp" traefik
-  mv "$tmp/traefik" "$bin"
-  chmod +x "$bin"
-  rm -rf "$tmp"
-  echo "$bin"
-}
-
-# Build (and cache) the mock LAPI binary, echoing its path. Go's build cache
-# makes the rebuild near-instant after the first run.
-ensure_mock() {
-  local bin="$CACHE_DIR/mocklapi"
-  mkdir -p "$CACHE_DIR"
-  ( cd "$MOCK_LIB_DIR/../mocklapi" && go build -o "$bin" . ) >&2
-  echo "$bin"
-}
-
-# Poll a URL until it returns the expected status code, or fail.
-# Usage: wait_for_status URL CODE [TIMEOUT_SECONDS] [curl args...]
-wait_for_status() {
-  local url="$1" expected="$2" timeout="${3:-30}"
-  shift 3 || true
-  local elapsed=0 got=""
-  while (( elapsed < timeout )); do
-    got=$(curl -s -o /dev/null -w '%{http_code}' "$@" "$url" || true)
-    if [[ "$got" == "$expected" ]]; then
-      return 0
-    fi
-    sleep 1
-    # Note: `((elapsed++))` returns exit 1 when elapsed is 0, which trips set -e.
-    elapsed=$((elapsed + 1))
-  done
-  echo "wait_for_status: $url expected $expected, last seen ${got:-<none>}" >&2
-  return 1
-}
-
-# Poll a URL until its body contains a substring, or fail. Used when the status
-# code alone can't tell the states apart (e.g. captcha page vs backend, both 200).
-# Usage: wait_for_body_contains URL NEEDLE [TIMEOUT_SECONDS] [curl args...]
-wait_for_body_contains() {
-  local url="$1" needle="$2" timeout="${3:-30}"
-  shift 3 || true
-  local elapsed=0 body=""
-  while (( elapsed < timeout )); do
-    body=$(curl -s "$@" "$url" || true)
-    if grep -q "$needle" <<<"$body"; then
-      return 0
-    fi
-    sleep 1
-    elapsed=$((elapsed + 1))
-  done
-  echo "wait_for_body_contains: $url did not contain \"$needle\" within ${timeout}s" >&2
-  return 1
-}
-
-# Assert a single curl returns the expected status code.
-# Usage: assert_status URL CODE [curl args...]
-assert_status() {
-  local url="$1" expected="$2"
-  shift 2 || true
-  local got
-  got=$(curl -s -o /dev/null -w '%{http_code}' "$@" "$url")
-  if [[ "$got" != "$expected" ]]; then
-    echo "assert_status: $url expected $expected, got $got" >&2
-    return 1
-  fi
-}
-
-# Assert a response header matches a value (case-insensitive name).
-# Usage: assert_header URL HEADER VALUE [curl args...]
-assert_header() {
-  local url="$1" header="$2" expected="$3"
-  shift 3 || true
-  local got
-  got=$(curl -s -D - -o /dev/null "$@" "$url" | tr -d '\r' \
-    | awk -v h="${header,,}" -F': ' 'tolower($1) == h { print $2; exit }')
-  if [[ "$got" != "$expected" ]]; then
-    echo "assert_header: $url header $header expected \"$expected\", got \"$got\"" >&2
-    return 1
-  fi
-}
-
-# Assert a response body contains a substring.
-# Usage: assert_body_contains URL NEEDLE [curl args...]
-assert_body_contains() {
-  local url="$1" needle="$2"
-  shift 2 || true
-  local body
-  body=$(curl -s "$@" "$url")
-  if ! grep -q "$needle" <<<"$body"; then
-    echo "assert_body_contains: $url expected to contain \"$needle\", got:" >&2
-    echo "$body" >&2
-    return 1
-  fi
-}
-
-# --- mock admin client -------------------------------------------------------
-
-lapi_add_decision() {
-  local ip="$1" type="${2:-ban}" duration="${3:-4h}"
-  curl -sS -X POST "http://127.0.0.1:${LAPI_PORT}/admin/decisions?ip=${ip}&type=${type}&duration=${duration}" >/dev/null
-}
-
-lapi_delete_decision() {
-  local ip="$1"
-  curl -sS -X DELETE "http://127.0.0.1:${LAPI_PORT}/admin/decisions?ip=${ip}" >/dev/null
-}
-
-# --- stack lifecycle ---------------------------------------------------------
-
-# start_stack SCENARIO_DIR
-# Spins up the mock + Traefik (with the scenario's dynamic.yml) and waits ready.
-start_stack() {
-  local scenario_dir="$1"
-  local traefik_bin mock_bin
-  traefik_bin="$(ensure_traefik)"
-  mock_bin="$(ensure_mock)"
-
-  WORKDIR="$(mktemp -d)"
-  # Expose the plugin source where Traefik's localPlugins loader expects it.
-  mkdir -p "$WORKDIR/plugins-local/src/github.com/maxlerebourg"
-  ln -s "$REPO_ROOT" "$WORKDIR/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
-
-  cp "$MOCK_LIB_DIR/traefik.yml" "$WORKDIR/traefik.yml"
-
-  # Render the scenario's dynamic config with the live ports / key / paths.
-  sed \
-    -e "s|@@APIKEY@@|${LAPI_KEY}|g" \
-    -e "s|@@LAPI_HOST@@|127.0.0.1:${LAPI_PORT}|g" \
-    -e "s|@@APPSEC_HOST@@|127.0.0.1:${APPSEC_PORT}|g" \
-    -e "s|@@BACKEND_URL@@|http://127.0.0.1:${BACKEND_PORT}|g" \
-    -e "s|@@SCENARIO_DIR@@|${scenario_dir}|g" \
-    "$scenario_dir/dynamic.yml" > "$WORKDIR/dynamic.yml"
-
-  "$mock_bin" \
-    --lapi-addr "127.0.0.1:${LAPI_PORT}" \
-    --backend-addr "127.0.0.1:${BACKEND_PORT}" \
-    --appsec-addr "127.0.0.1:${APPSEC_PORT}" >"$WORKDIR/mock.log" 2>&1 &
-  MOCK_PID=$!
-
-  ( cd "$WORKDIR" && exec "$traefik_bin" --configfile=traefik.yml ) >"$WORKDIR/traefik.log" 2>&1 &
-  TRAEFIK_PID=$!
-
-  wait_for_status "http://127.0.0.1:${LAPI_PORT}/health" 200 30
-  # AppSec stand-in: a bare GET carries no "rpc2" URI, so it answers 200 (allow).
-  wait_for_status "http://127.0.0.1:${APPSEC_PORT}/" 200 30
-  # /ping is served by Traefik itself once it is up (plugin compilation included).
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/ping" 200 60
-}
-
-stop_stack() {
-  [[ -n "$TRAEFIK_PID" ]] && kill "$TRAEFIK_PID" 2>/dev/null || true
-  [[ -n "$MOCK_PID" ]] && kill "$MOCK_PID" 2>/dev/null || true
-  [[ -n "$TRAEFIK_PID" ]] && wait "$TRAEFIK_PID" 2>/dev/null || true
-  [[ -n "$MOCK_PID" ]] && wait "$MOCK_PID" 2>/dev/null || true
-  [[ -n "$WORKDIR" && -d "$WORKDIR" ]] && rm -rf "$WORKDIR" || true
-}
-
-dump_diagnostics() {
-  echo "=== traefik.log ==="
-  cat "$WORKDIR/traefik.log" 2>/dev/null || true
-  echo "=== mock.log ==="
-  cat "$WORKDIR/mock.log" 2>/dev/null || true
-}
-
-# EXIT trap: runs after the scenario body (or after a failed assertion under
-# `set -e`), so it relies only on globals, never on run_scenario's locals.
-_scenario_cleanup() {
-  local rc=$?
-  if (( rc != 0 )); then
-    dump_diagnostics > "$SCENARIO_LOG" 2>&1 || true
-    echo "[$SCENARIO_NAME] failed. Logs written to $SCENARIO_LOG" >&2
-  fi
-  stop_stack
-  exit $rc
-}
-
-# run_scenario SCENARIO_NAME SCENARIO_DIR BODY_FN
-# Wraps lifecycle + diagnostics so each run.sh stays declarative.
-run_scenario() {
-  SCENARIO_NAME="$1"
-  local dir="$2" body="$3"
-  SCENARIO_LOG="/tmp/e2e-mock-${SCENARIO_NAME}.log"
-  trap _scenario_cleanup EXIT
-
-  echo "[$SCENARIO_NAME] starting binary stack (Traefik + mock LAPI)..."
-  start_stack "$dir"
-  "$body"
-  echo "[$SCENARIO_NAME] OK"
-}
@@ -1,28 +0,0 @@
-# Static Traefik configuration for the binary e2e suite.
-# The dynamic part (router + bouncer middleware + backend service) lives in
-# dynamic.yml, generated per scenario by common.sh.
-entryPoints:
-  web:
-    address: ":8000"
-    forwardedHeaders:
-      # The test's curl sets X-Forwarded-For; preserve it through the proxy.
-      insecure: true
-
-log:
-  level: INFO
-
-accessLog: {}
-
-# /ping on the web entrypoint is the readiness probe — no dashboard/API needed.
-ping:
-  entryPoint: web
-
-providers:
-  file:
-    filename: dynamic.yml
-    watch: false
-
-experimental:
-  localPlugins:
-    bouncer:
-      moduleName: github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
@@ -1,6 +0,0 @@
-// Standalone module so this test helper stays out of the plugin module:
-// it is excluded from the plugin's `go build ./...`, `go test ./...`,
-// golangci-lint and `go mod vendor`. Stdlib only — no dependencies.
-module mocklapi
-
-go 1.22
@@ -1,135 +0,0 @@
-// Command mocklapi is a minimal Crowdsec LAPI stand-in for the binary e2e
-// suite. It answers only the few LAPI routes the plugin calls — live/none
-// decision lookups, the stream poll and the usage-metrics push — and lets the
-// test drive decisions through /admin instead of `cscli`. It also serves the
-// stub upstream that Traefik proxies allowed requests to.
-//
-// It is NOT a Crowdsec/AppSec conformance harness — the real WAF engine (OWASP
-// CRS, virtual patching) is out of scope. The AppSec endpoint here emulates a
-// single deterministic rule so the suite can exercise the plugin's AppSec
-// wiring (header forwarding, allow/block handling) end to end. See the README.
-package main
-
-import (
-	"encoding/json"
-	"flag"
-	"log"
-	"net/http"
-	"strings"
-	"sync"
-)
-
-// Decision is the subset of a LAPI decision the plugin actually reads.
-type Decision struct {
-	Value    string `json:"value"`
-	Type     string `json:"type"`
-	Duration string `json:"duration"`
-}
-
-var (
-	mu      sync.Mutex
-	active  = map[string]Decision{} // ip -> decision currently in force
-	deleted = map[string]Decision{} // ip -> decision to report in the stream "deleted" list
-)
-
-func writeJSON(w http.ResponseWriter, v any) {
-	w.Header().Set("Content-Type", "application/json")
-	_ = json.NewEncoder(w).Encode(v)
-}
-
-func list(m map[string]Decision) []Decision {
-	out := make([]Decision, 0, len(m))
-	for _, d := range m {
-		out = append(out, d)
-	}
-	return out
-}
-
-func main() {
-	lapiAddr := flag.String("lapi-addr", "127.0.0.1:8090", "address for the LAPI mock")
-	// The stub upstream Traefik proxies allowed requests to — the binary-suite
-	// equivalent of the traefik/whoami container. Not AppSec.
-	backendAddr := flag.String("backend-addr", "127.0.0.1:8091", "address for the stub upstream service")
-	// AppSec WAF stand-in (the real engine listens on :7422). Not a CRS engine.
-	appsecAddr := flag.String("appsec-addr", "127.0.0.1:8092", "address for the AppSec mock")
-	flag.Parse()
-
-	go func() {
-		log.Fatal(http.ListenAndServe(*backendAddr, http.HandlerFunc(func(w http.ResponseWriter, _ *http.Request) {
-			_, _ = w.Write([]byte("E2E_BACKEND_OK\n"))
-		})))
-	}()
-
-	// AppSec mock: the plugin forwards the request metadata in X-Crowdsec-Appsec-*
-	// headers and reads our status — 200 allows, 403 blocks. We emulate one
-	// deterministic virtual-patching rule (block any URI containing "rpc2", the
-	// exact probe from examples/appsec-enabled) so the plugin's AppSec path is
-	// exercised without standing up the real WAF.
-	go func() {
-		log.Fatal(http.ListenAndServe(*appsecAddr, http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
-			if strings.Contains(r.Header.Get("X-Crowdsec-Appsec-Uri"), "rpc2") {
-				w.WriteHeader(http.StatusForbidden)
-			}
-		})))
-	}()
-
-	mux := http.NewServeMux()
-
-	// Readiness probe for the test harness (empty body, 200).
-	mux.HandleFunc("/health", func(http.ResponseWriter, *http.Request) {})
-
-	// live / none mode: the plugin asks about one IP and expects a decision
-	// array, or the literal `null` when there is none.
-	mux.HandleFunc("/v1/decisions", func(w http.ResponseWriter, r *http.Request) {
-		mu.Lock()
-		defer mu.Unlock()
-		if d, ok := active[r.URL.Query().Get("ip")]; ok {
-			writeJSON(w, []Decision{d})
-			return
-		}
-		_, _ = w.Write([]byte("null"))
-	})
-
-	// stream mode: report the whole active set as "new" and anything removed as
-	// "deleted". Re-sending the same on every poll is harmless — the plugin just
-	// re-adds to / re-deletes from its cache.
-	mux.HandleFunc("/v1/decisions/stream", func(w http.ResponseWriter, _ *http.Request) {
-		mu.Lock()
-		defer mu.Unlock()
-		writeJSON(w, map[string][]Decision{"new": list(active), "deleted": list(deleted)})
-	})
-
-	// usage-metrics push: accept and ignore.
-	mux.HandleFunc("/v1/usage-metrics", func(w http.ResponseWriter, _ *http.Request) {
-		w.WriteHeader(http.StatusCreated)
-	})
-
-	// Test control plane: add / remove decisions instead of cscli.
-	mux.HandleFunc("/admin/decisions", func(_ http.ResponseWriter, r *http.Request) {
-		q := r.URL.Query()
-		ip := q.Get("ip")
-		mu.Lock()
-		defer mu.Unlock()
-		switch r.Method {
-		case http.MethodPost:
-			dtype := q.Get("type")
-			if dtype == "" {
-				dtype = "ban"
-			}
-			duration := q.Get("duration")
-			if duration == "" {
-				duration = "4h"
-			}
-			active[ip] = Decision{Value: ip, Type: dtype, Duration: duration}
-			delete(deleted, ip)
-		case http.MethodDelete:
-			if d, ok := active[ip]; ok {
-				deleted[ip] = d
-				delete(active, ip)
-			}
-		}
-	})
-
-	log.Printf("mocklapi: LAPI on %s, backend on %s, appsec on %s", *lapiAddr, *backendAddr, *appsecAddr)
-	log.Fatal(http.ListenAndServe(*lapiAddr, mux))
-}
@@ -1,29 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          # IP bouncing disabled — this scenario exercises AppSec only.
-          crowdsecMode: none
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          crowdsecAppsecEnabled: "true"
-          crowdsecAppsecScheme: http
-          crowdsecAppsecHost: "@@APPSEC_HOST@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
@@ -1,23 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=appsec
-
-# AppSec wiring check: the plugin forwards each request to the AppSec engine and
-# enforces its verdict. The mock emulates one virtual-patching rule (block any
-# URI containing "rpc2"), mirroring examples/appsec-enabled. This proves the
-# plugin's AppSec path end to end (header forwarding + allow/block handling); it
-# does not test the real WAF's detection accuracy.
-body() {
-  echo "[$SCENARIO] benign request must pass (AppSec allows)"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] request whose URI contains 'rpc2' must be blocked (AppSec 403)"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo/rpc2" 403 -H "X-Forwarded-For: 1.2.3.4"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,33 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: stream
-          updateIntervalSeconds: "2"
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
-          captchaProvider: turnstile
-          # Cloudflare Turnstile public test keys: render a valid widget without
-          # contacting a real API key.
-          captchaSiteKey: "1x00000000000000000000AA"
-          captchaSecretKey: "1x0000000000000000000000000000000AA"
-          captchaHtmlFilePath: "@@SCENARIO_DIR@@/captcha.html"
-          captchaGracePeriodSeconds: "10"
@@ -1,26 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=captcha
-
-body() {
-  echo "[$SCENARIO] adding captcha decision for 1.2.3.4"
-  lapi_add_decision 1.2.3.4 captcha 5m
-
-  # Status stays 200 before/after (captcha page vs backend), so gate on the body
-  # marker appearing once the captcha decision has been polled.
-  echo "[$SCENARIO] captcha page must be served once the decision is polled (200 + marker)"
-  wait_for_body_contains "http://127.0.0.1:${WEB_PORT}/foo" "E2E_CAPTCHA_PAGE_MARKER" 15 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] captcha response is HTTP 200 (the captcha page itself, not a 403)"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] non-flagged IP must still pass through to the backend"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 5.6.7.8"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,28 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: stream
-          updateIntervalSeconds: "2"
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
-          banHtmlFilePath: "@@SCENARIO_DIR@@/ban.html"
-          remediationHeadersCustomName: "X-E2E-Remediation"
@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=custom-ban-page
-
-body() {
-  echo "[$SCENARIO] adding ban decision"
-  lapi_add_decision 1.2.3.4 ban 5m
-
-  echo "[$SCENARIO] banned response becomes 403 once the next stream poll lands"
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/foo" 403 15 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] banned response Content-Type is HTML"
-  assert_header "http://127.0.0.1:${WEB_PORT}/foo" Content-Type "text/html; charset=utf-8" -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] banned response body contains the custom marker"
-  assert_body_contains "http://127.0.0.1:${WEB_PORT}/foo" "E2E_CUSTOM_BAN_PAGE_MARKER" -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] banned response carries the custom remediation header (remediationHeadersCustomName)"
-  assert_header "http://127.0.0.1:${WEB_PORT}/foo" X-E2E-Remediation "ban" -H "X-Forwarded-For: 1.2.3.4"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,26 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: live
-          defaultDecisionSeconds: "2"
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
@@ -1,26 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=live-mode
-
-body() {
-  echo "[$SCENARIO] no decision -> first hit queries LAPI, returns 200, caches 'allowed' for 2s"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] adding ban decision for 1.2.3.4"
-  lapi_add_decision 1.2.3.4 ban 5m
-
-  # Stays 200 until the cached 'allowed' (defaultDecisionSeconds) expires, then
-  # the re-query sees the ban — poll instead of guessing the cache TTL.
-  echo "[$SCENARIO] hit must turn 403 once the cached 'allowed' expires and LAPI is re-queried"
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/foo" 403 15 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] another non-banned IP must still pass"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 5.6.7.8"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,25 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: none
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=none-mode
-
-body() {
-  echo "[$SCENARIO] no decision -> request passes (LAPI queried per request)"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] adding ban decision for 1.2.3.4"
-  lapi_add_decision 1.2.3.4 ban 5m
-
-  echo "[$SCENARIO] none mode has no cache -> next request must be blocked immediately"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 403 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] deleting decision"
-  lapi_delete_decision 1.2.3.4
-
-  echo "[$SCENARIO] previously banned IP must pass again immediately"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,26 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: stream
-          updateIntervalSeconds: "2"
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
@@ -1,30 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=stream-mode
-
-body() {
-  echo "[$SCENARIO] no decision yet -> request allowed"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] adding ban decision for 1.2.3.4"
-  lapi_add_decision 1.2.3.4 ban 5m
-
-  echo "[$SCENARIO] banned IP must be blocked once the next stream poll lands (HTTP 403)"
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/foo" 403 15 -H "X-Forwarded-For: 1.2.3.4"
-
-  echo "[$SCENARIO] non-banned IP must still pass (HTTP 200)"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 5.6.7.8"
-
-  echo "[$SCENARIO] deleting ban decision"
-  lapi_delete_decision 1.2.3.4
-
-  echo "[$SCENARIO] previously banned IP must pass again once the deletion is polled"
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/foo" 200 15 -H "X-Forwarded-For: 1.2.3.4"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -1,28 +0,0 @@
-http:
-  routers:
-    r:
-      rule: "PathPrefix(`/foo`)"
-      entryPoints:
-        - web
-      service: backend
-      middlewares:
-        - bouncer
-  services:
-    backend:
-      loadBalancer:
-        servers:
-          - url: "@@BACKEND_URL@@"
-  middlewares:
-    bouncer:
-      plugin:
-        bouncer:
-          enabled: "true"
-          crowdsecMode: stream
-          updateIntervalSeconds: "2"
-          crowdsecLapiScheme: http
-          crowdsecLapiHost: "@@LAPI_HOST@@"
-          crowdsecLapiKey: "@@APIKEY@@"
-          forwardedHeadersTrustedIps:
-            - "127.0.0.1/32"
-          clientTrustedIps:
-            - "1.2.3.4/32"
@@ -1,24 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-HERE="$(cd "$(dirname "$0")" && pwd)"
-# shellcheck source=../../lib/common.sh
-source "$HERE/../../lib/common.sh"
-
-SCENARIO=trusted-ips
-
-body() {
-  echo "[$SCENARIO] banning the trusted IP 1.2.3.4 and an untrusted IP 5.6.7.8"
-  lapi_add_decision 1.2.3.4 ban 5m
-  lapi_add_decision 5.6.7.8 ban 5m
-
-  # The untrusted IP turning 403 is our signal that the bans have been polled;
-  # it also doubles as the control proving the bouncer is active.
-  echo "[$SCENARIO] untrusted banned IP must be blocked once the bans are polled (HTTP 403)"
-  wait_for_status "http://127.0.0.1:${WEB_PORT}/foo" 403 15 -H "X-Forwarded-For: 5.6.7.8"
-
-  echo "[$SCENARIO] trusted IP must bypass the bouncer even though it is banned"
-  assert_status "http://127.0.0.1:${WEB_PORT}/foo" 200 -H "X-Forwarded-For: 1.2.3.4"
-}
-
-run_scenario "$SCENARIO" "$HERE" body
@@ -0,0 +1,6 @@
+listen_addr: 0.0.0.0:7422
+appsec_config: crowdsecurity/crs-inband
+name: e2eAppSec
+source: appsec
+labels:
+  type: appsec
@@ -0,0 +1,55 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-appsec-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-appsec-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      # IP bouncing disabled — we only test AppSec body inspection here.
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=none"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecappsecenabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecappsechost=crowdsec:7422"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      COLLECTIONS: "crowdsecurity/appsec-crs-inband"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    volumes:
+      - ./acquis.yaml:/etc/crowdsec/acquis.yaml:ro
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 60
+      start_period: 15s
@@ -0,0 +1,40 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=appsec
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack (AppSec collections download — may take ~30s on first boot)..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready crowdsec 180
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] benign request must pass"
+assert_status http://localhost:8000/foo 200
+
+echo "[$SCENARIO] SQL-injection-like query string must be blocked by OWASP CRS (inband)"
+# Classic SQLi probe: ?id=1' OR '1'='1 — caught by CRS rule 942100/942130 (paranoia 1).
+assert_status "http://localhost:8000/foo?id=1%27%20OR%20%271%27%3D%271" 403
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,59 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-captcha-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+      - ./captcha.html:/captcha.html:ro
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-captcha-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=stream"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.updateintervalseconds=3"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.captchaprovider=turnstile"
+      # Cloudflare Turnstile public test keys (always pass / always fail variants exist).
+      # These render a valid widget without contacting any real API key.
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.captchasitekey=1x00000000000000000000AA"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.captchasecretkey=1x0000000000000000000000000000000AA"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.captchahtmlfilepath=/captcha.html"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.captchagraceperiodseconds=10"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,53 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=captcha
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] adding captcha decision for 1.2.3.4"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type captcha --duration 5m
+
+echo "[$SCENARIO] waiting one stream tick + buffer..."
+sleep 6
+
+echo "[$SCENARIO] captcha response must be HTTP 200 (the captcha page itself, not a 403)"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] captcha response body must contain the captcha template marker"
+body=$(curl -s http://localhost:8000/foo -H "X-Forwarded-For: 1.2.3.4")
+if ! grep -q "E2E_CAPTCHA_PAGE_MARKER" <<<"$body"; then
+  echo "Expected response body to contain E2E_CAPTCHA_PAGE_MARKER, got:" >&2
+  echo "$body" >&2
+  exit 1
+fi
+
+echo "[$SCENARIO] non-flagged IP must still pass through to the backend"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 5.6.7.8"
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,53 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-banpage-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+      - ./ban.html:/ban.html:ro
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-banpage-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=stream"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.updateintervalseconds=3"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.banhtmlfilepath=/ban.html"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,53 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=custom-ban-page
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] adding ban decision"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type ban --duration 5m
+
+echo "[$SCENARIO] waiting one stream tick + buffer..."
+sleep 6
+
+echo "[$SCENARIO] banned response status is 403"
+assert_status http://localhost:8000/foo 403 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] banned response Content-Type is HTML"
+assert_header http://localhost:8000/foo Content-Type "text/html; charset=utf-8" -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] banned response body contains the custom marker"
+body=$(curl -s http://localhost:8000/foo -H "X-Forwarded-For: 1.2.3.4")
+if ! grep -q "E2E_CUSTOM_BAN_PAGE_MARKER" <<<"$body"; then
+  echo "Expected response body to contain E2E_CUSTOM_BAN_PAGE_MARKER, got:" >&2
+  echo "$body" >&2
+  exit 1
+fi
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,51 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-live-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-live-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=live"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.defaultdecisionseconds=2"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,48 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=live-mode
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] no decision -> first hit queries LAPI, returns 200, caches 'allowed' for 2s"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] adding ban decision for 1.2.3.4"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type ban --duration 5m
+
+echo "[$SCENARIO] waiting for defaultDecisionSeconds cache to expire..."
+sleep 3
+
+echo "[$SCENARIO] next hit must re-query LAPI and now see the ban"
+assert_status http://localhost:8000/foo 403 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] another non-banned IP must still pass"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 5.6.7.8"
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,50 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-none-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-none-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=none"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,48 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=none-mode
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] no decision -> request passes (LAPI queried per request)"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] adding ban decision"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type ban --duration 5m
+
+echo "[$SCENARIO] none mode has no cache -> next request must be blocked immediately"
+assert_status http://localhost:8000/foo 403 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] deleting decision"
+docker exec crowdsec cscli decisions delete --ip 1.2.3.4
+
+echo "[$SCENARIO] previously banned IP must pass again immediately"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,51 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-stream-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-stream-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=stream"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.updateintervalseconds=3"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=stream-mode
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] no decision yet -> request allowed"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] adding ban decision for 1.2.3.4"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type ban --duration 5m
+
+echo "[$SCENARIO] waiting one stream tick + buffer..."
+sleep 6
+
+echo "[$SCENARIO] banned IP must be blocked (HTTP 403)"
+assert_status http://localhost:8000/foo 403 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] non-banned IP must still pass (HTTP 200)"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 5.6.7.8"
+
+echo "[$SCENARIO] deleting ban decision"
+docker exec crowdsec cscli decisions delete --ip 1.2.3.4
+
+echo "[$SCENARIO] waiting one stream tick + buffer..."
+sleep 6
+
+echo "[$SCENARIO] previously banned IP must pass again"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] OK"
@@ -0,0 +1,52 @@
+services:
+  traefik:
+    image: traefik:v3.7.1
+    container_name: e2e-trusted-traefik
+    command:
+      - "--log.level=INFO"
+      - "--accesslog"
+      - "--api.insecure=true"
+      - "--providers.docker=true"
+      - "--providers.docker.exposedbydefault=false"
+      - "--entryPoints.web.address=:80"
+      - "--entryPoints.web.forwardedHeaders.insecure=true"
+      - "--experimental.localplugins.bouncer.modulename=github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin"
+    volumes:
+      - /var/run/docker.sock:/var/run/docker.sock:ro
+      - ../../../..:/plugins-local/src/github.com/maxlerebourg/crowdsec-bouncer-traefik-plugin
+    ports:
+      - "8000:80"
+    depends_on:
+      crowdsec:
+        condition: service_healthy
+
+  whoami:
+    image: traefik/whoami
+    container_name: e2e-trusted-whoami
+    labels:
+      - "traefik.enable=true"
+      - "traefik.http.routers.r.rule=PathPrefix(`/foo`)"
+      - "traefik.http.routers.r.entrypoints=web"
+      - "traefik.http.routers.r.middlewares=bouncer@docker"
+      - "traefik.http.services.s.loadbalancer.server.port=80"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.enabled=true"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdsecmode=stream"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.updateintervalseconds=3"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.crowdseclapikey=40796d93c2958f9e58345514e67740e5"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.forwardedheaderstrustedips=172.16.0.0/12"
+      - "traefik.http.middlewares.bouncer.plugin.bouncer.clienttrustedips=1.2.3.4/32"
+
+  crowdsec:
+    image: crowdsecurity/crowdsec:v1.7.8
+    container_name: crowdsec
+    environment:
+      DISABLE_ONLINE_API: "true"
+      BOUNCER_KEY_TRAEFIK: 40796d93c2958f9e58345514e67740e5
+      CUSTOM_HOSTNAME: crowdsec
+      CROWDSEC_BYPASS_DB_VOLUME_CHECK: "true"
+    healthcheck:
+      test: ["CMD", "cscli", "lapi", "status"]
+      interval: 2s
+      timeout: 3s
+      retries: 30
+      start_period: 5s
@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+HERE="$(cd "$(dirname "$0")" && pwd)"
+# shellcheck source=../../lib/common.sh
+source "$HERE/../../lib/common.sh"
+
+SCENARIO=trusted-ips
+PROJECT="e2e-${SCENARIO}"
+COMPOSE_FILE="$HERE/docker-compose.yml"
+LOG_FILE="/tmp/e2e-${SCENARIO}.log"
+
+cleanup() {
+  local rc=$?
+  if (( rc != 0 )); then
+    dump_diagnostics "$PROJECT" "$COMPOSE_FILE" > "$LOG_FILE" 2>&1 || true
+    echo "Scenario failed. Logs written to $LOG_FILE"
+  fi
+  docker compose -p "$PROJECT" -f "$COMPOSE_FILE" down -v --remove-orphans >/dev/null 2>&1 || true
+  exit $rc
+}
+trap cleanup EXIT
+
+echo "[$SCENARIO] starting stack..."
+docker compose -p "$PROJECT" -f "$COMPOSE_FILE" up -d --wait
+
+echo "[$SCENARIO] waiting for crowdsec readiness..."
+wait_crowdsec_ready
+
+echo "[$SCENARIO] waiting for traefik readiness..."
+wait_for_status http://localhost:8000/foo 200 30
+
+echo "[$SCENARIO] banning the trusted IP 1.2.3.4 and an untrusted IP 5.6.7.8"
+docker exec crowdsec cscli decisions add --ip 1.2.3.4 --type ban --duration 5m
+docker exec crowdsec cscli decisions add --ip 5.6.7.8 --type ban --duration 5m
+
+echo "[$SCENARIO] waiting one stream tick + buffer..."
+sleep 6
+
+echo "[$SCENARIO] trusted IP must bypass the bouncer even though it is banned"
+assert_status http://localhost:8000/foo 200 -H "X-Forwarded-For: 1.2.3.4"
+
+echo "[$SCENARIO] untrusted banned IP must be blocked (control: proves the bouncer is active)"
+assert_status http://localhost:8000/foo 403 -H "X-Forwarded-For: 5.6.7.8"
+
+echo "[$SCENARIO] OK"